Featuresīrand New with Thermal Paste Pre-Applied by AMDĤ. User-controlled RGB illumination relies on socket AM4 motherboards that support this feature, like the ASRock RGB LED, ASUS Aura sync, Biostar VIVID LED DJ, Gigabyte RGB Fusion, and MSI Mystic Light. We’ve also added support for Razer Chroma, so you can enjoy ambient in-game effects that react dynamically to every action and event.īut the Wraith Prism isn’t just a pretty face we’ve increased motherboard and RAM compatibility by minimizing the profile and added direct-contact heat pipes and fan overclocking control to increase thermal effectiveness, too. The AMD Wraith Prism goes where no stock cooler has gone before with per-RGB LED control around the illuminated light ring and transparent fan blades. I hope this cleared up some confusion.Product Overview The Premium AMD Wraith Prism Cooler I can even control the colors from my MSI motherboard software. In my case, I had downloaded the wrong version of the driver software. It took me a while to figure it out, but once I had the above setup, the software worked. Each driver version is only looking for the model of cooler it is tailored for, so make sure that in your case, you download and run the WRAITH PRISM software. For instance, you cannot use Wraith Prism software with a Wraith Max cooler. The software you use should match the model of Wraith cooler you have.The cooler can ONLY be connected to a standard USB 2.0 header. With one of these third-party coolers, and after a little tinkering, you’ll be able to squeeze an extra. FYI, I'm guessing the AMD USB HEADER on your motherboard is proprietary and is not compatible with this cooler. There are plenty of exceptionally capable coolers available for the same 40 premium.In this state, the software will not be able to communicate with the cooler. If the RGB wire is connected, the controller will default to using the RGB control and USB control will be turned off. For color control, however, ONLY the USB wire should be connected to a USB 2.0 header. Of course, for fan control, the fan header should always be connected to the CPU fan control header on the motherboard.

There are two conditions that must be met in order for the Wraith software to work:

Amd prism cooler rgb control